Bilcare

Vento Venus

OPA / Foil / Polyoflefin

Bilcare Vento venus is a multilayered cold-formable aluminum based blister structure with special polyolefinic side which provides excellent protection against water vapor, light gases, etc. for pharmaceutical push through blisters.

Applications

Suitable for high sensitive to moisture like Amoxicillin and Potassium Clavulanate.

Salient Features

  • This specific structure helps in minimizing gas bulging effect compare to regular venus
  • Excellent Interlayer integrity Suitable for highly sensitive formulations.
  • Better deep draw Forming
  • Lowest solvent retention.
  • Non-Toxic

Technical Data Sheet

Water Vapour Transmission Rate

0.002 mg / cavity

@ 40 °C, 75%RH

Film Thickness

129 ± 10% μ

DIN 53370

Film GSM

207 ± 10% μ

DIN EN ISO 2286

Impact Stregth

min. 700 gm

ASTM D 1709

Heat seal strength

min. 0.3 Kg/cm

PE side to Alu foil

Toxicity

Non Toxic

USP 661

Property

Test Method

Unit

Specifications

Total Thickness of film

DIN 53370

micron

144 ± 10%

Total GSM

DIN EN ISO 2286

gm/m2

230.4 ± 10%

Heat Seal Strength (Barrier PVC side to Alu foil)

Standard

kg/cm

0.3 minimum

 

Vento Venus Variants

OPA / Foil / Polyoflefin
25 / 50 / 60
  • Customized products and colours can be developed to suit the specific cases.

Innovation Possibilities

  • Protect: Differential grating pattern gives holographic visual effect

Additional Information

Printed

Parameter

Test Method

Unit

Specification

Toxicity Test

Current Usp

 

Non Toxic

Rub ProofNess Test(20 Rubs at 2 Psi)

In House

 

Should Pass

Average No. Of Joints Per Roll/Spools

 

Number

2 max

 

Non Printed

Parameter

Test Method

Unit

Specification

Toxicity Test

Current Usp

 

Non Toxic

Average No. Of Joints Per Roll/Spools

 

Number

2 max

 

Slitted

Inner Diameter of Core

76mm/152mm

Slit Width tolerance

Upper limit +1 and lower Limit -1mm

Slit Roll Width

50mm to 1190mm

Packing

Each Slitted Spool Wrapped in Black PE film

Labelling

Bar Coded labels containing the product details are fixed inside the core, on stretched wrapped film and finally on the carton .Other label indicating the coated surface is also affixed on the spool